![]() ![]() How to burn a Windows password recovery CD How to clone entire disk for backup or upgradingįorgot Windows Server 2003 2008 Domain Administrator Password How to fix boot problems if Windows won't start correctly How to recover data from formatted or damaged partition How to create a bootable recovery USB Disk and boot from it If your computer's motherboard does not support booting from USB drive, please burn a boot CD instead. Change to another USB port and restart your computer. ![]() The BIOS on some motherboards only check the first few USB ports. In some BIOS versions, it is called "Removable Devices" or "External Devices".Ĭhange to another USB port. If your computer is newer, check for some other ways that the USB option might be worded. The number one reason a bootable flash drive or other USB device will not boot is because the BIOS is not configured to check the USB port first.ĭid not find a "USB Device" boot order listing in BIOS If your computer was manufactured around 2001 or before, it may not have this ability. Save the BIOS setting and restart your computer. Setup the BIOS to boot from the USB drive. The USB device key will be listed under Hard Drives or Removable Devices. Note: If you use BIOS to change the order of booting devices on your computer, the new booting order will remain in effect until you undo your changes.Įnter the BIOS setup by pressing the appropriate key ('Setup', usually F2 or DELETE) METHOD 2: IF YOU CANNOT SELECT YOUR BOOT DEVICE USING THE BOOT DEVICE SELECTION MENU, YOU CAN SETUP THE STARTING DEVICE SEQUENCE THROUGH BIOS: Note: You can use the Boot Menu Key (usually, it is F12) to select the active boot device, allowing you to bypass your BIOS for setting the boot sequence temporarily. METHOD 1: THE EASIEST WAY TO REBOOT FROM YOUR USB DEVICE IS TO SELECT THE DEVICE FROM THE BOOT DEVICE SELECTION MENU: Select your newly created bootable USB drive and press Enter.Shut down the system and turn it back on with the USB key plugged in. Highlight Boot Option #1 and press Enter.On this screen, press the right-arrow key to select the Boot tab. While the F2 key is held down, press the Power button to turn on your PC.Press and hold down the F2 key on your keyboard.Plug-in your bootable USB drive to your PC and turn off the PC.On most computers, you can access BIOS by pressing and holding down the F2 key while your computer is booting up. Also, you need to disable the secure boot option in the same BIOS menu. To boot your computer from the newly created bootable drive, you need to change the boot order in the BIOS settings menu of your PC. How to Boot Your Computer From a Bootable Windows 10 USB Drive Your Windows 10 bootable USB drive is now ready. Select Close in the secure boot prompt.Select Start the bottom of Rufus to begin creating your bootable USB drive.Activate the Create extended label and icon files option.For example, Win10USBDrive is a pretty descriptive name. In the Volume label field, enter a descriptive name for your bootable drive.Select UEFI (non CSM) from the Target system menu.Select GPT from the Partition scheme menu.Make sure Standard Windows installation is selected in the Image option dropdown menu.Choose Select next to this option, navigate to where you’ve saved Windows 10’s ISO file, and select the file to add it to Rufus. From the Boot selection menu, select Disk or ISO image (Please select).Select your USB drive from the Device dropdown menu at the top. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |